- 1 What comes first EQ or compression?
- 2 Should you use compression on live vocals?
- 3 What does a compressor do for live sound?
- 4 How does audio compression work?
- 5 What is the difference between EQ and compression?
- 6 Should I come before compression?
- 7 Should you compress a beat?
- 8 How do you add compression to live vocals?
- 9 How loud should vocals be in a mix?
- 10 How much compression should I use on vocals?
- 11 What does a limiter do in GarageBand?
- 12 Why is GarageBand speeding up my track?
What comes first EQ or compression?
Each position, EQ pre ( before ) or EQ post (after) compression produces a distinctly different sound, a different tonal quality, and coloration. As a rule, using EQ in front of your compressor produces a warmer, rounder tone, while using EQ after your compressor produces a cleaner, clearer sound.
Should you use compression on live vocals?
Inserting a small amount of compression can help tidy up some of the more extreme dynamics of the vocal performance. I typically don’t use compression ratios high than 3:1 or so for a vocal.
What does a compressor do for live sound?
Simply, a compressor is used to compress a sound’s dynamic range. That is, to make the louder and quieter parts of the sound’s performance closer to each other in level. It does this in one of two ways. In “downward compression,” the compressor attenuates the signal when it gets too loud.
How does audio compression work?
Compression is the process of lessening the dynamic range between the loudest and quietest parts of an audio signal. This is done by boosting the quieter signals and attenuating the louder signals. The controls you are given to set up a compressor are usually: as compression often attenuates the signal significantly.
What is the difference between EQ and compression?
An EQ is what you use to control gain changes of frequencies in a non-dynamic way, like Honest_Al explained, while a Multiband Compressor does this dynamically like a compressor would. Usually you would use a Multiband Compressor in the Master Bus in the mix or the mastering stage.
Should I come before compression?
Cutting the low-frequency resonances before the compressor can help tame the low-frequency anomalies before they reach the compressor, making for more transparent and natural processing.
Should you compress a beat?
Not master it, get it as loud as possible and then try to put the vocals in. It’ll probably end up distorting. Compression will help glue your track together so it’s a super useful tool, especially on vocals.
How do you add compression to live vocals?
While listening to your entire mix (do not solo the vocal ), pull down the threshold until the compressor starts compressing. Add makeup gain as needed so the vocal doesn’t drop in volume. Adjust the threshold, ratio, and makeup gain until you can hear every word of the performance clearly.
How loud should vocals be in a mix?
Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.
How much compression should I use on vocals?
A good starting point for a rock vocal would be a 4:1 ratio with a medium-fast attack and a medium release. Then, set the threshold for around 4 to 6dB of gain reduction. Increase or decrease the attack time until you get the right level of forwardness for the mix.
What does a limiter do in GarageBand?
The purpose of the limiter is to stop any clipping or distortion, and that’s the main thing. An increase in volume by a little bit is just a by-product. Approaching the compressor in this manner is good as well.
Why is GarageBand speeding up my track?
1 Answer. Per Apple – GarageBand plays everything at a sample rate of 44.1K. If you import something recorded at a sample rate of 48K it will play slower and at a lower pitch in GB. If you import something sampled at a rate of 22K, it will play faster and at a higher pitch in GarageBand.